Here's a simple way to figure out how much wallpaper you need:

⠀

1. Measure the height and width of your walls. Multiply them together to get the total wall area. If your wall is 3 meters high and 4 meters wide, the area is 12 square meters.

2. Each roll of your wallpaper covers about 5.2 square meters (since it's 10 meters long and 52 cm wide).

3. Divide your wall area by the coverage of one roll to see how many rolls you’ll need. For example, if your wall is 12 square meters, you’ll need a little more than 2 rolls (12 ÷ 5.2 = 2.3), so go ahead and get 3 rolls.

4. Order a little extra just in case—about 10-15% more—to cover mistakes or if you need to match patterns.

⠀

And that's it! Simple and safe to make sure you're not short of wallpaper.

Yes! Our wallpaper is designed with sustainability in mind. We use only water-based, non-toxic inks that are free from harmful VOCs (volatile organic compounds). Additionally, all our paper and nonwoven materials come from FSC®-certified forests, ensuring responsible forest management. Our partner factory hold FSC certification, with our FSC number being SGSCH-COC-020053.

⠀

Furthermore, our products meet stringent safety standards. They are tested according to EN13501-1:2007+A1:2009 European Fire Regulations and have achieved a B-s1, d0 rating, making them safe for use in commercial spaces. Our wallpapers also comply with the European Product Standard EN 15102:2007+A1:2011 for wallcoverings.

While it’s possible to purchase more wallpaper later, we strongly recommend buying the right quantity from the beginning. Since our wallpaper is produced through a traditional process, with colors mixed by hand, there may be slight variations between batches. To ensure a consistent look across your walls, it’s best to order enough from the same batch. Always measure carefully and consider ordering an extra roll just in case!

Yes, you can clean our wallpaper! We recommend using a soft, damp cloth to gently wipe the surface. Avoid using excessive water, as the wallpaper is not designed for wet cleaning. Always be gentle to preserve the quality of the wallpaper.

Covering a wall with our wallpaper is super easy, especially because you apply the glue to the wall instead of the paper. Here’s how to do it with just a few tools, and it’s a one-person job!

⠀

Tools You’ll Need:

⠀

1. Wallpaper paste – The glue for the wall.

2. Roller or brush – To apply the glue smoothly on the wall.

3. Utility knife or scissors – To cut the wallpaper.

4. Smoothing brush or plastic smoother – To press the wallpaper onto the wall and remove air bubbles.

5. Tape measure – To measure your wall and wallpaper lengths.

6. Level or plumb line – To make sure your wallpaper is straight.

7. Damp cloth – To clean up any excess glue.

⠀

How to Do It:

⠀

1. Prepare the wall: Make sure the surface is clean, smooth, and dry.

2. Apply glue: Use a roller or brush to spread wallpaper paste directly onto the wall in the area you're about to cover. No need to mess around with pasting the wallpaper itself—this keeps things neat and simple.

3. Hang the wallpaper: Starting at the top of the wall, press the wallpaper onto the glued area. It’s easy to slide into position since the glue is already on the wall. Use your smoothing brush to press the paper down and remove any bubbles.

4. Trim the edges: Use your utility knife or scissors to cut off any excess wallpaper at the bottom or along the edges.

5. Repeat: Just keep applying glue to the next section of the wall and hang the next strip, aligning the edges as you go.

⠀

That’s it! With just a few tools and one person, you can easily transform a room with beautiful wallpaper.